Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国
Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国

NEWS

NEWS
Your location:
Homepage
/
/
/
What are the precautions for metal laser cutting machine typesetting

What are the precautions for metal laser cutting machine typesetting

(Summary description)Before using the Metal laser cutting machine, we will import the prepared drawings into the program, and then use the typesetting software to arrange the graphics on a board, so that the Metal laser cutting machine can process the products in batches.

What are the precautions for metal laser cutting machine typesetting

(Summary description)Before using the Metal laser cutting machine, we will import the prepared drawings into the program, and then use the typesetting software to arrange the graphics on a board, so that the Metal laser cutting machine can process the products in batches.

Information

Before using the Metal laser cutting machine, we will import the prepared drawings into the program, and then use the typesetting software to arrange the graphics on a board, so that the Metal laser cutting machine can process the products in batches. Among them, although the typesetting process is very short, there is a lot of knowledge hidden in it. If the typesetting is slightly wrong, it will have a great impact on the cutting effect of the entire board. So, here is a list of six important points for attention in the layout of Metal laser cutting machine.

Metal laser cutting machine

1. Corner melting
When decelerating to cut corners of thin steel plates, the Metal laser cutting machine melts the corners due to overheating. A small radius is generated at the corner to maintain the high-speed cutting of the laser and avoid overheating and melting of the steel plate when cutting the corner, so as to obtain good cutting quality, reduce cutting time and improve productivity.

2. Spacing of parts
In general, when cutting thick plates and hot plates, the spacing between the parts should be large, because the heat of the thick plate and hot plate has a great influence. When cutting corners, sharp corners and small graphics, it is easy to burn the edges and affect the cutting quality.

3. Lead setting
In the process of cutting thicker plates, in order to make the slits connect well and prevent burns at the start and end points, a transition line is often drawn at the beginning and end of the cutting, respectively called the lead and the tail. The lead and the tail are the workpiece itself. It is useless, so it should be arranged outside the scope of the workpiece, and at the same time be careful not to set the lead wire in a sharp corner and other places that are not easy to dissipate heat. The connection between the lead and the kerf should use a circular arc transition as much as possible to make the machine move smoothly and avoid the burn caused by the corner stop.

4. Common edge cutting
Co-edge two or more parts into a combination, and try to co-edge large-scale regular graphics. Co-edge cutting can greatly shorten the cutting time and save raw materials.

5. Parts Collision
In order to maximize production efficiency, many Metal laser cutting machines operate continuously for 24 hours, and use unmanned automatic loading/unloading devices to hit the overturned parts that have been cut and cause damage to the cutting head and production interruption, bringing about greater loss. This requires attention when sorting:
①Choose an appropriate cutting path and bypass the already cut parts to reduce collisions.
②Choose the best cutting route to reduce the cutting time.
③ Combine multiple small parts with tiny connections automatically or manually. After cutting, the removed parts can easily disconnect the tiny connections.

6. Remaining material processing
After the metal laser cutting machine is used to cut the parts, the skeleton-like residual material on the metal laser cutting machine table needs to be removed as soon as possible to facilitate subsequent cutting operations. For laser cutting equipment that does not have an automatic discharge device, the skeleton-shaped residual material can be cut into small pieces for easy and quick removal. This avoids the operator's personal injury caused by moving heavy and sharp-edged remnants.
 

Keyword:

Scan the QR code to read on your phone

SuzhouYosoon laser equipment Co.,Ltd

Focus on the application and development of the laser industry

Innovation is the source of enterprise development

Business integrity, win-win cooperation

Contact details 

Address: No. 31 Tangxi Road, Huqiu District, Suzhou City

Tel:Vivian Yu +86(0)18896540037 (wechat/whatsapp/mobile)

E-mail:vivian@alsgroup.cn

Web:www.yosoon.cn

Message:Request message response within one hour

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright © 1999-2018 All Rights Reserved       苏ICP备19073043号   Powered by www.300.cn

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright

© 1999-2018 All Rights Reserved 

苏ICP备19073043号

Powered by www.300.cn

Please fill in your requirements

Username used for comment:
Customer message
Description: