How to Repair and Maintain Lasers

05/13

2020

　　The main faults of ultraviolet lasers include the following: the laser module is not connected, the indicator light is malfunctioning, the module is overheating, the ultraviolet laser temperature is too low, there are issues with the ultraviolet laser parameters, and the water chiller has failed. So, every day, our ultraviolet… Laser Repair What should you do in case of failure? How about maintenance and upkeep?

　　1. Laser Repair Before use, the height position of the lifting mechanical guide rail on the workbench must be adjusted.

　　2. The objective lens needs to be cleaned regularly. Before use, you can clean it with a cloth and a small amount of alcohol. Be sure to wipe in one direction.

　　3. To clean the laser inside the chassis, you can use an air gun to blow air through the air ducts and clean the relevant circuit boards inside the chassis.

　　4. Laser Repair Before you start using it, please check whether the software settings have been changed.

　　5. The steps for opening and closing must be followed.

　　6. Clean the host and keyboard.

　　7. Use the laser repair and inspection button to check whether the indicator lights are functioning properly.

　　8. Regularly inspect the operating status of the fans and correct any fans that are running abnormally.

　　9. After shutting down, promptly remove debris, especially any metal residues or metal powder that have been marked, clean the surrounding area, and ensure proper ventilation.

Laser Repair